SALES - BATESON 3550 16' X 6'6 LARGE STANDARD PLATFORM TRAILER
Model 3550 is Bateson'slargest standard platform trailer at 16' x 6' 6" although the body length can be increased to 22' and the width to 7' or 7'6". Three axles can also be fitted but any increase in unladen weight will reduce the payload within the 3500kg maximum legal gross weight.
All trailers in the platform trailer range are fully galvanised, and have Avonride softride fully independent rubber suspension axles and a hydraulically damped hitch with a lockable cast coupling and power assisted hand brake.
Standard equipment includes a phenol coated plywood floor, flush fitting side rails with post sockets and roping hooks, spare wheel, a front telescopic jockey wheel and full road lights.
Model 3550 with twin axles is available with a hydraulic tilting body and ramp door to load equipment with a low ground clearance. Steel sides are available for trailers up to 16' long.
3550 shown with hydraulic tilt and ramp door, galvanised steel sides and mesh extension sides.
Trailer weight and capacity (Kg) | |||
Gross weight |
Unladen weight |
Capacity |
|
|
880 |
2620 |
|
Overall dimensions (mm) | |||
Length |
Width |
Height |
|
0 |
|||
Internal dimensions (mm) | |||
Length |
Width |
Height |
Platform Height |
5000 |
2000 |
0 |
700 |
Additional information
| |||
Tyre size |
Tow ball height |
||
195-70 x 13 |
450 |
||
Carrying capacity will vary with optional specification. |
Price £2,475.00
Optional extras | |||||
300mm High headboard and galvanised steel hinged sides |
£395.00 | ||||
|
£500.00 | ||||
Headboard only |
£75.00 | ||||
Loading ramps and carrier |
£120.00 | ||||
Rear loading legs |
£40.00 | ||||
2000Kg Manual winch and bracket |
£300.00 | ||||
1800Kg 12V Electric winch |
£500.00 | ||||
Alloy treadplate covered floor |
£420.00 | ||||
4 Recessed deck rings |
£60.00 | ||||
Wheel clamp |
£95.00 | ||||
Extra body width (to 7' or 7'6) |
£200.00 | ||||
Extra body length per 60cm (24") |
£150.00 | ||||
Hydraulic tilt and ramp door |
£380.00 | ||||
Third axle 1800Kg (not with hydraulic tilt) |
£500.00 | ||||
1.8M Alloy ramps and carrier |
£375.00 | ||||
Ladder rack |
£55.00 | ||||
Reversing lights (c/w twin 7pin or one 13pin plug) |
£35.00 | ||||
All prices are subject to VAT |
Please contact us for more details.